Wakeboard Rack (If So Equipped) - SeaDoo RXP 4-Tec Supercharged Operator's Manual

NOTE:
The handles are supplied for
the observer to have a grip when
watching.
CAUTION:
Never use the ski/wake-
board post to tow other crafts.
41) Wakeboard Rack
(if so equipped)
Convenient removable rack(s) to carry
wakeboard(s).
To install:
– Position rack on bumper trim with
its centerline in between the buckle
receivers located in the footwell
area.
– Position the 2 outer J-hooks of the
rack so as to grab the fiberglass lip
of the hull underneath the bumper
trim.
F18L3DY
– Attach the male buckles onto the
buckle receivers located in the
footwell.
______________________
54
2°
1°
www.SeaDooManuals.net
F18L3EY
– Tighten the straps by firmly pulling
upwards.
F18L3FY
– Double-check that rack is properly
installed by giving it a tug.
WARNING
If rack is not properly secured on
the watercraft, it could become
loose and detach unexpectedly,
creating a risk of injury to people
nearby. To avoid:
- Ensure straps are in good condi-
tion.
- Secure rack properly on water-
craft.
- Periodically check that straps are
tight.
– When installing a wakeboard on the
rack, position wakeboard fin(s) out-
ward then secure bungee cords to
tightly hold wakeboard.