Front Storage Compartment Cover Latch; Tool Kit; Air Intake Opening - SeaDoo RXP 4-Tec Supercharged Operator's Manual

WARNING
Ensure to properly secure extin-
guisher with the supplied retaining
straps.
Some models feature a removable
'
basket. It s handle is convenient to
carry personal objects.
1
F18L2YY
TYPICAL
1. Removable basket
Some models may have convenient
rubber bands and other useful acces-
sories.
RXP Models
Lift the basket to get access to the
holder for an approved fire extin-
guisher (sold separately). It also con-
tains the Operator's Guide and the

tool kit.

F19L0BY
14) Front Storage
Pull the latch lever upward in order to
open the front storage compartment
cover. Always relatch.
NOTE:
tightness of storage cover. Tighten if
needed and make sure storage cover
latches properly.
15) Tool Kit
The tool kit contains tools needed
to perform basic watercraft mainte-
nance.
All Models except RXP
It is located under the seat extension,
F18L0WY
1. Seat extension
2. Tool kit
RXP Models
It is located in the front storage com-
partment inside the holder for the fire
extinguisher. See FRONT STORAGE
COMPARTMENT above.
All Models except RXP

16) Air Intake Opening

This is where air enters to supply the
engine and to ventilate the engine
compartment. If the air intake open-
ing is kept under water, water will get
inside bilge.
_____________________
www.SeaDooManuals.net
Compartment Cover
Latch
Verify periodically the lock pin
1
2
43