Handlebar; Throttle Lever; Engine Start/Stop Button - SeaDoo RXP 4-Tec Supercharged Operator's Manual

Limited-Speed Operation
The 4-TEC models also offers a special
safety lanyard -- the SEA-DOO Learn-
TM
ing Key -- which electronically lim-
its the speed of the watercraft to ap-
proximately 55 km/h (35 MPH) there-
fore enabling first time users and less
experienced operators to learn how to
operate the watercraft while gaining
the necessary confidence and control.
F00L2SY

2) Handlebar

The handlebar controls the direction of
the watercraft. Turning the handlebar
to the right steers the watercraft to the
right and inversely.
WARNING
Check handlebar and correspond-
ing steering nozzle and side vanes
operation before starting. Never
turn handlebar while someone is
nearby rear of watercraft. Keep
away from steering moving parts
(nozzle, side vanes, linkage etc.)
Adjustment (if so equipped)
The handlebar height can be adjusted
to suit rider preferences.
To perform this adjustment, turn the
knob underneath the handlebar.
______________________
34
F18K18Y
TYPICAL
1. Adjustment knob

3) Throttle Lever

When the throttle lever is squeezed,
the watercraft accelerates.
fully released, engine automatically
slows down to idle speed and water-
craft is gradually stopped by water
drag.
4) Engine Start/Stop
To start engine, depress and hold the
start/stop button. Release immedi-
ately after engine is started.
To stop engine, depress the start/stop
button. When stopped, disconnect
safety lanyard from the post. It is
suggested to release throttle lever
first.
Directional
when the throttle is released or
when engine is off.
www.SeaDooManuals.net
1
Button
WARNING
control
When
is reduced