Battery
Description
4 cell, 41-Wh, 2.8-Ah, Li-ion battery
Before disassembling the computer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface.
2.
Firmly slide the release latch (1) to unlock the battery and slide the battery release latch (2) to release
the battery.
3.
Slide the battery (3) from the middle to remove it from the computer.
To insert the battery:
CAUTION:
1.
Holding the battery in the middle, slide the battery (1) straight into the computer until the battery
release latch locks into place.
40
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Do not slant the battery as you insert it. Slide the battery in straight.
Spare part number
728460-001