Download Print this page
Oracle Storage 6180 Array Getting Started Manual

Oracle Storage 6180 Array Getting Started Manual

Advertisement

Quick Links

Sun Storage 6180 Array
Getting Started Guide
This guide provides an overview of the hardware installation process for Oracle's Sun Storage 6180 array. For
detailed information, have the Sun Storage 6180 Array Hardware Installation Guide available as you go through the
steps in this document.
Additional documentation is listed in the section
documentation web site:
http://www.oracle.com/technetwork/indexes/documentation/index.html
Review Ship Kit Contents
Ship Kit Items
FIGURE 1
Controller Tray Ship Kit
1 .
Documentation
2 .
Four or Eight Small Form-factor Pluggables (SFPs)
*
3 .
Power cables
4 .
Two RJ45-RJ45 Ethernet cables
* AC power cables are shipped in a carton separate from the array unit. Although not pictured, DC power cables are included for DC units.
"Documentation for This Product"
5.
Two Fibre Channel (FC) cables
6.
Two PS2 6-pin DIN to RJ45 serial cables (for service access)
7.
Two RJ45-DB9 serial adapters (one straight through and one
null modem)
and available at the Oracle
1

Advertisement

loading

Summary of Contents for Oracle Storage 6180 Array

  • Page 1 Sun Storage 6180 Array Getting Started Guide This guide provides an overview of the hardware installation process for Oracle’s Sun Storage 6180 array. For detailed information, have the Sun Storage 6180 Array Hardware Installation Guide available as you go through the steps in this document.
  • Page 2: Before You Begin

    Then, review the following documents: • Important Safety Information for Sun Hardware Systems • Sun Storage 6180 Array Site Preparation Guide • Sun Storage 6180 Safety and Compliance Manual • Sun Storage 6180 Array Release Notes...
  • Page 3: Review Controller Tray Front And Rear Panels

    Review Controller Tray Front and Rear Panels shows the locations of LEDs and components on the controller tray front panel. shows the FIGURE 4 FIGURE 5 locations of ports and components on the controller tray rear panel. Controller Tray Front Panel FIGURE 4 Callout Description...
  • Page 4: Connect The Intertray Cables

    Connect the Intertray Cables shows a configuration consisting of one controller tray and four expansion trays. Other configurations FIGURE 6 are supported, as described in the Installation Guide. Note: In the below figure, black cables represent Drive Channel 1 (Controller A), and green cables represent Drive Channel 2 (Controller B). Connect the Controller Tray to the Expansion Trays FIGURE 6...
  • Page 5: Prepare Management Connections

    Note: To configure in-band array management, see the Installation Guide. Connect the Data Hosts You can connect data hosts to the Sun Storage 6180 Array through FC switches or directly. illustrates a FIGURE 8 connection through FC switches using a single host channel on each controller. More connection options are discussed in the Installation Guide.
  • Page 6: Turn On Power And Install Management Host Software

    2. Download Sun Storage Common Array Manager software and install on the management host, as described in the Sun Storage Common Array Manager Quick Start Guide. Documentation for This Product Additional documentation for the Sun Storage 6180 array is available at: ■ http://download.oracle.com/docs/cd/E19373-01/index.html Documentation for the Sun Storage Common Array Manager software is available at: ■...

This manual is also suitable for:

Sun storage 6180 array