Fade-In And Fade-Out; To Perform A Fade-In; To Perform A Fade-Out - Tascam CC-222MKII Owner's Manual

5 – Recording CDs—Advanced recording
NOTE
This function is only available from the remote control
unit. It is not possible to use this function with the main
unit only.

Fade-in and fade-out

To provide smooth beginnings and endings to
recorded tracks, the unit provides fade facilities.
Fade-ins are from –∞ (silence) to the set input level
("Signal volume" on page 25) and fade-outs go from
the current input volume to silence.
The fade-in and fade-out times can be set indepen-
dently in increments of one second, from 1 second to
24 seconds.
To set the fade times:
1 Press the key repeatedly until the dis-
MENU
play shows
FADE IN > XXS
is the current fade-in time, in seconds.
2
Turn the
MULTI DIAL
change the value of the fade-in time.
3
Press the key again so that the display
MENU
shows FADE OUT> XXS
the current fade-out time, in seconds.
4
Turn the MULTI DIAL
change the value of the fade-out time.
It is possible to set the fade-in time only (per-
form step 5 after step 2) or the fade-out time
only (in step 1, press the
fade-out time menu item is shown).
32
TASCAM CC-222MKII Owner's Manual
, where
XX
or use the keys to
SKIP
, where XX is
or use the SKIP keys to
key until the
MENU

To perform a fade-in:

1 With a recordable disc loaded, press the
RECORD key so that the unit enters record
ready mode.
2
Start the source material, and press the
key.
FADER
The display shows
FADE IN
specified in the menu item above.
As the fade progresses, the monitored signal
gradually becomes louder, reflecting the level
recorded on disc.

To perform a fade-out:

1 While recording, press the
The display shows
FADE OUT
specified in the menu above.
As the fade progresses, the monitored signal
gradually becomes quieter, reflecting the
level recorded on disc.
2
When the end of the fade-out time is reached,
the unit goes into record ready mode.
Recording can be restarted with the
key or the or
PLAY
The fade-in and fade-out times can be reset to new
values while recording is in progress.
Note that fade operations cannot be carried out when
auto track is enabled.
for the time
key.
FADER
for the time
FADER
keys.
PAUSE