Monarch 9855 Quick Reference page 5

L o a d i n g L a b e l s o r T a g s
Open the cover.
1.
Unlock the printhead by turning the retaining latch.
2.
Lift printhead assembly using the printhead tab until the assembly
3.
locks into place.
Place the roll of supply on the supply holder. For labels, the supply
4.
unrolls from the top or the bottom. For tags, make sure the supply
unrolls from the bottom, because tag rolls are wound face in. Do not
pick up the printer by the supply holder.
Printhead
Tab
Deflector
Tab
3