Premium 8 & Satellite Radio; Touch Screen Navigation - Volkswagen 2011 CC Quick Start Manual

Premium 8 & Satellite Radio
In you 2010 Volkswagen CC, you can meet radio's next generation, and music is always wonderful in your CC.
Figure 2.4
Selecting and saving a preset radio station:
1. Push the power button to turn on the radio.
2. Press AM, FM, or SAT to select a band.
3. Press the TUNE soft key (A).
4. Use the knob (B) at the lower right to select
a station. To make a selected station a pre-
set station, press and hold any of the six
preset station soft keys (C). The new station
will appear in the display.
5. To select a specific preset station, simply
press the appropriate preset station soft

Touch Screen Navigation

Navigate you way by using optional RNS 510 Navigation system
Figure 2.5
Using the map function:
You can simply drag your finger on the touch
screen to move the map around. This will allow
you to see what lies ahead on your journey. To
return the map to your present position, press
the button with the car surrounded by arrows
located in the
2010 Volkswagen CC Quick Start Guide
keys to select the station you want.
Playing CD:
1. Press the LOAD/EJECT button.
2. Press any of the six soft keys (E) to select a
slot for the CD and then insert the CD.
3. Press the MEDIA hard key and press CD to
listen.
WARNING
Distracting the driver from traffic can lead

to collisions and injuries.
Using the radio system while driving can

distract from traffic.
Always drive attentively and responsibly.

Select volume settings so that acoustic

signals from the outside are always audi-
ble.
Get current traffic information
If you have the optional subscription to SIRIUS®
TRAFFIC for real-time traffic information, press
the Map Type selection button in the lower left
of the touch screen. It is the second button
from the left side of the screen. Select the
fourth button in the menu that appears, that
says "Traffic," and you'll receive local traffic re-
ports where available. Signs will point out areas
of potential slowdowns and construction.
Assigning a destination:
1. Press the NAV hard key.
2. Press Dest. on the touch screen.
3. Press ADDRESS to enter address .
4. Press START to begin the route.
16 |