Windshield Wipers; Warning Lights - Volkswagen 2011 CC Quick Start Manual

Windshield Wipers:

Always remember that keep visibility clear.
Figure 1.12
Choose intermittent:
Move the wiper stalk one click up to acti-

vate the intermittent setting from the OFF
position,
The switch at the top of the stalk rotates to

vary the speed of the wipers—faster to the
right, slower to the left.
Switch to continuously slow:
Move the wiper stalk two clicks up from the

OFF position.
Switch to continuously fast:
Move the wiper stalk three clicks up from

OFF position.
Pulse quick wipes
Press the wiper stalk down for a single

wipe from OFF position.

Warning Lights

The warning lights show the status of different features and signal possible faults
Figure 1.13
2010 Volkswagen CC Quick Start Guide
Press and hold the wiper stalk down for two

seconds for a faster wipe. When you re-
lease the stalk, the wipers will begin.
Wash Windshield:
Pull the stalk toward you to activate the

washer function. The wipers wipe and
washer fluid sprays as long as you pull the
stalk.
CAUTION
Windshield washer fluid without enough

frost protection can freeze on the wind-
shield and reduce visibility. In freezing
winter temperature, only use the wind-
shield washer fluid when adequate frost
protection has been added to it.
Never use the windshield wipers/washers

when it is freezing without first defrosting
the windshield. The washer solution may
freeze on the windshield and reduce visi-
bility.
Overview
Some of the warning and indicator lights shown
in the illustration and in the following tables
belong to specific modes or are a component of
optional equipment. Ask your authorized
Volkswagen dealer or a qualified workshop if
you have questions.
10 |