IBM System x3550 M3 Type 4254 Installation And User Manual page 95

Fan 6
Figure 52. Fan installation
4. Orient the fan over the fan slot in the fan assembly bracket so that the fan
connector aligns with the connector on the system board.
Figure 53. Fan installation
5. Insert the fan into the fan slot in the fan assembly bracket and press it down
until it is seated correctly in the slot and the fan connector is seated correctly in
the connector on the system board.
Results
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 106.
Fan tabs
Fan connector on
the system board
Fan 3
Fan 2
Fan 1
Fan connector
Fan (side view)
Chapter 2. Installing optional devices
81