Installing A Sas/Sata 4 Pac Hdd Option - IBM System x3550 M3 Type 4254 Installation And User Manual

Figure 74. DVD drive cable connection
Results
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 106.

Installing a SAS/SATA 4 Pac HDD option

Use this information to install a SAS/SATA 4 Pac HDD option.
About this task
You can install an IBM System x3550 M3 hot-swap SAS/SATA 4 Pac HDD option
to add four additional 2.5-inch hot-swap hard disk drives in the server. See
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/ for a
list of supported optional devices. To order a SAS/SATA 4 Pac HDD option,
contact your IBM sales representative or IBM reseller.
The SAS/SATA 4 Pac HDD option kit contains the following components:
v One 2.5-inch hard disk drive backplane (with bracket)
v Four drive bay filler panels
v One SAS signal cable
v One 4 Pac hard disk drive cage and screws
v One bezel (depending on the option you purchase)
To install a SAS/SATA 4 Pac HDD option, complete the following steps:
97
Chapter 2. Installing optional devices