San-T-Flush Operation - Fleetwood 1996 Owner's Manual

46
-WASTE WATER SYSTEM
Page 3 of 5
SAN-T-FLUSH OPERATION
(using sanitizing bottle from kit)
1. Dump holding tanks in the usual manner at an approved station.
2. Leave dump valves open.
3. Attach garden hose to San-T-Flushattachment.
4. Remove clear plastic bottle.
5. Place one (1) waste liquefier tablet into screen ..
6~Replace
the bottle. Hand tighten ..
7. Hook water hose to inlet side of the sanitizing bottle cover.
8. Connect the male disconnect to the San-T-Flush valve (yellow
handle). Tum the valve to "BLACK TANK."
9. Flush black tank until tablet is 2/3 dissolved.
10. While water is running, tum the San-T-Flush valve to "GREY
WATER TANK" and flush until the tablet is dissolved ..
11. Tum San-T-Flush valve to "BLACK TANK."
12. Remove San-T-Flush attachment and garden hose.
13. Remove thesewer hose and cap the outlet.
14. Rinse out the sewer hose with fresh water and remove the sewer
hose from the dump station .
. Replace sewer or dump statim) covers.
© 1995 Fleetwood Enterprises Inp.
American Eagle
Wide Body
ISSUE DATE: 7/95
All rights reserved