Fleetwood 1996 Owner's Manual page 207

45
TRANSMISSION -OPERATION
Page 3 of 3
To display the codes:
1. Stop the vehicle, shift into NEUTRAL and set the
parking brake.
2. Press the DIAGNOSTIC MODE button on the lever shift
selector once to enter the diagnostic mode. The four
digits of the current code and any pertinent parameters
are continuously flashed on the display.
3. Press the MODE button to cycle the display to the next
code with its pertinent information. Dashes.indicate all
stored codes have been displayed.
To clear any active inhibits, depress and hold the MODE button for an
extended length of time. To clear the code from memory, depress and hold the
MODE button for a longer period of time. All active inhibits will also be
cleared during a normal vehicle shutdown.
See the Chassis Operator's Manual for additional information.
© 1995 Fleetwood Enterprises IDc.
American Eagle
W/de8ody
ISSUE DATE: 7/95
AU rights reserved