Figure 1. Cabinet Dimensions.
Header Standoff Height: 36 1/2"
NOTE: DO NOT INSTALL CABINET ON FLOOR SURFACE
LOWER THAN THE FRONTAL HEARTH SURFACE.
* Wallboard Standoff Height
Figure 3. Depth requirement to rear wall.
Figure 5. Corner framing dimensions.
Figure 2. Minimum horizontal vent
allowance through wall.
Figure 4. Vent Adaptor orientation.
Figure 5a. Corner Installation - 5/8 vent, rear termination.
Wall Cutout :
4/6 Pipe - 10"x10"
5/8 Pipe - 11"x11"
Observe all vent
and termination
clearance
requirements.
7