Jøtul GZ 550 DV II Acadia Installation And Operation Instructions Manual page 17

Figure 28. Lift the Burner Skirt up and out of the firebox.
Pull Frame Spring
Latch to release.
Figure 29. Frame latch and air shutter stem location.
Burner Tube
Figure 30. Move shutter forward to disengage the
burner tube assembly. .
Figure 31. Move air shutter back to access the
burner orifice.
Air Shutter
Wingnut
Air
Shutter
Burner Orifice
4. Change the Pilot Orifice:
• FROM WITHIN THE FIREBOX, disengage the
Pilot Hood by releasing the retainer clip as
shown in fig. 32. Using the 4 mm hex key
supplied, unscrew the pilot orifice (counter-
clockwise). Replace with the appropriate
orifice:
#51 for Natural gas
#30 for Propane
Tighten new orifice into the base of the pilot
assembly.
• Replace Pilot Hood by pushing it into the
base.
Pilot Hood
Pilot Orifice
PILOT ASSEMBLY
Figure 32. Pilot Orifice replacement.
Retainer Clip
17