Chevrolet Cruze 2011 Owner's Manual page 319

WARNING (Continued)
To be certain the vehicle will not
move, put blocks at the front and
rear of the tire farthest away from
the one being changed. That
would be the tire on the other
side, at the opposite end of the
vehicle.
This vehicle may come with a jack,
spare tire, and wheel block(s) or a
tire sealant and compressor kit. To
use the jacking equipment to
change a spare tire safely, follow
the instructions below. Then see
Tire Changing on page 10 75. To
use the tire sealant and compressor
kit, see Tire Sealant and
Compressor Kit on page 10 68.
To use the wheel blocks, lift the
wheel block and lock into place.
When the vehicle has a flat tire (B),
use the following example as a
guide to assist you in the placement
of wheel blocks (A).
Vehicle Care
A. Wheel Block
B. Flat Tire
The following information explains
how to repair or change a tire.
10-67