Chevrolet Cruze 2011 Owner's Manual page 189

Using the Delete All Name Tags
Command
This command deletes all stored
name tags in the Hands Free
Calling Directory and the OnStar
Turn by Turn Destinations Directory.
To delete all name tags:
1. Press . For vehicles with a
navigation system, say Hands
Free, after the tone.
2. Say Delete all name tags.
Listing Stored Numbers
The list command will list all the
stored numbers and name tags.
Using the List Command
1. Press . For vehicles with a
navigation system, say Hands
Free, after the tone.
2. Say Directory.
3. Say Hands Free Calling.
4. Say List.
Making a Call
Calls can be made using the
following commands.
Dial or Call: The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Re dial : This command is used to
dial the last number used on the cell
phone.
Using the Dial or Call
Command
1. Press . For vehicles with a
navigation system, say Hands
Free, after the tone.
2. Say Dial or Call.
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Infotainment System
Using the Digit Dial Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press . For vehicles with a
navigation system, say Hands
Free, after the tone.
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
7-31