Chevrolet Cruze 2011 Owner's Manual page 196

8-4 Climate Controls
To place the system in automatic
mode do the following:
1. Press AUTO.
2. Set the temperature. Allow the
system time to stabilize. Then
adjust the temperature as
needed for best comfort.
English units can be changed to
metric units through the Driver
Information Center (DIC). See
Vehicle Personalization on
page 5 34.
Manual Operation
(Power): Press to turn the
climate control system on or off.
Fan Control: Turn the knob
clockwise or counterclockwise to
increase or decrease the fan speed.
The selected fan speed is indicated
by a number on the display screen.
Press AUTO to return to automatic
operation.
MODE (Air Delivery Mode): Press
to change the direction of the
airflow. The current mode appears
in the display screen. Automatic
operation is cancelled and manual
mode is initiated. Press AUTO to
return to automatic operation.
To change the current mode, select
one of the following:
(Vent): Air is directed to the
instrument panel outlets.
(Bi-level): Air is divided
between the instrument panel
outlets and the floor outlets.
(Tri Level): Air is divided
between the windshield, instrument
panel, and floor outlets.
(Floor): Air is directed to the
floor outlets.
-
(Defog): Clears the windows of
fog or moisture. Air is directed to the
windshield and floor outlets.
0
(Defrost): Clears the
windshield of fog or frost more
quickly. Air is directed to the
windshield.
#
(Air Conditioning): Press to
turn the automatic air conditioning
on or off. If the fan is turned off or
the outside temperature falls below
freezing, the air conditioning
compressor will not run.
Press AUTO to return to automatic
operation and the air conditioner
runs as needed. When the indicator
light is on, the air conditioner runs
automatically to cool the air inside
the vehicle or to dry the air needed
to defog the windshield faster.