Taillamps, Turn Signal, Sidemarker, Stoplamps, And Back-Up Lamps - Chevrolet Cruze 2011 Owner's Manual

10-32 Vehicle Care
3. Remove the bulb (A) from the
bulb socket.
4. Install the new bulb in the bulb
socket.
5. Install the bulb socket into the
headlamp assembly by turning
clockwise.
Side Marker Lamp
1. Push lamp assembly toward the
rear of the vehicle and remove.
2. Remove the socket from the
lamp assembly by turning
counterclockwise.
3. Remove the bulb from the bulb
socket (A).
4. Install the new bulb in the bulb
socket.
5. Replace the bulb socket into the
headlamp assembly by turning
clockwise.
6. Replace the lamp assembly.
Taillamps, Turn Signal,
Sidemarker, Stoplamps,
and Back-Up Lamps
Trunk Deck Inboard Taillamps
1. Open the trunk.