Chevrolet Cruze 2011 Owner's Manual page 185

Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
Accepting a Call
Turn the MENU or MENU/SEL knob
to Answer and press the MENU or
MENU/SEL knob.
Declining a Call
Turn the MENU or MENU/SEL knob
to Decline and press the MENU or
MENU/SEL knob.
Switching Between Calls (Call
Waiting Calls Only)
To switch between calls:
1. Press the MENU or MENU/
SEL knob.
2. Select Switch Call from
the menu.
Conference Calling
Conference calling and three way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work.
To start a conference while in a
current call:
1. Press the MENU or MENU/
SEL knob.
2. Select Enter Number.
3. Enter the character sequence
then select call. See Entering a
Character Sequence in
Operation on page 7 6 for more
information.
4. After the call has been placed,
turn the MENU or MENU/SEL
knob button and choose Merge
Calls.
5. To add more callers to the
conference call, repeat Steps 1
through 4. The number of callers
that can be added is limited by
your wireless service carrier.
Infotainment System
Ending a Call
Press the MENU or MENU/SEL
knob and select Hang Up.
Muting a Call
To Mute a Call
Press the MENU or MENU/SEL
knob and select Mute Call.
To Cancel Mute
Press the MENU or MENU/SEL
knob and select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The Bluetooth system can send
numbers during a call. This is used
when calling a menu driven phone
system.
1. Press the MENU or MENU/SEL
knob and select Enter Number.
2. Enter the character sequence.
See Entering a Character
Sequence in Operation on
page 7 6 for more information.
7-27