Unpacking The Product - Joovy 40X Series Instruction Manual

Assembling and Using your Stroller
!
To ensure safe operation of your stroller, please follow these instructions carefully.

Unpacking the Product

• Carefully remove stroller and all parts from the box and plastic bag.
• Identify the parts (stroller, front wheels (2), rear wheels (2), canopy, tray, car seat carrier
support, rear axle, washers (4), snap pins (2), hub caps (2) and documents) with the pictures
in Figures 1a and 1b.
NOTE: The rear axle is attached with red tie wraps to the rear frame tube. Please carefully
detach the axle from the frame and remove the yellow foam from the ends of the axle for
installation. Also, extra washers and snap pins may be included.
• Discard all packaging materials properly.
• Remove the plastic coverings from all foam handles and any other areas of the product and
discard also.
• DO NOT allow children to play with any packaging materials.
Figure 1a
Adult assembly is required for this product. This package contains small
parts. Keep all small parts away from children during assembly.
Caboose Stand-On Tandem Instruction Manual
Figure 1b
CAUTION
!
No Tools Required.
Page 2