Setting Your Smartphone Or Tablet; Configuring Swannview Link App - Swann NVR-7085 models Instruction Manual

BASIC SETUP
EN
Setting up your Smartphone or Tablet
Have a Smartphone or Tablet?
Then head to the respective Apple App Store or Google Play, download the
tablets) for free and turn your iOS or Android device into a monitoring centre for your NVR. Have the peace of mind that you can
monitor your home at any time from any place. With "SwannLink" Peer to Peer technology, connecting your smartphone, tablet
or PC to your NVR is so easy - there's practically no need to fiddle around with complicated network configuration. Best of all, it
only takes minutes to get it all up and running!
Important Note: As the SwannView Link app is constantly under development to improve your user experience, the
Configuring the SwannView Link App
After you have downloaded and installed SwannView Link (HD) on your smartphone or tablet, locate the app and tap the icon to
run. Take your smartphone/tablet to your NVR and follow the instructions below.
1. In the Live View screen, tap
In the Devices menu, tap + to add a new Device as shown below.
2.
3. On the NVR you will see a sticker with a QR Code and your UID number (the sticker will be on the top or bottom of the NVR
case depending on which NVR model you have).
On the app, tap the QR Code button
automatically populates the
password for your NVR as shown below and tap
4. Next, tap
that's it, you're connected!
Remember to check the Swann website for updates and more information: www.swann.com
16
following screens may differ slightly from the actual app.
at the top left and then tap
and use your smartphone's camera to scan the QR sticker on the NVR. This
UID box with the NVR's UID. Enter a Device Name (anything you like), the username and
to save your settings.
to automatically check the number of channels and then you will see your cameras on screen and
SwannView Link app (or SwannView Link HD
.
for