Summa SummaCut D160SE User Manual page 10

SummaCut
•
8-key control panel.
•
Convenient operator control via a 16-character liquid crystal display.
•
Metric or English units.
•
Menu mode for selection of the cutter's power-up operating configuration, controlled
by microprocessor.
•
Wide variety of axial cutting speeds (in metric or English units).
•
Up to four separate user configurations stored in the non-volatile memory.
•
Automatic media pull from roll.
•
Automatic end of media sensing.
•
Manual knife for cutting off the finished sign.
•
Knife depth and offset test.
•
Overcut for easy weeding.
User-selectable DM/PL ™ , HP-GL ™ and HP-GL/2 ™ software protocols.
•
• Multiple recut feature.
• OPOS 2.0 (factory installed SE option)
•
Optional stand with basket (Standard for D120(SE), D140SE and D160SE).
General Information
User's Manual
1-2