Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART 99-3107
99-3107S
99-3107G
KIT FEATURES
• DIN Radio Provision With Pocket
• ISO Mount Radio Provision With Pocket
• Painted To Match Factory Dash
99-3107S = SILVER
99-3107G = GRAY
KIT COMPONENTS
• A) Trim Plate/Pocket • B) ISO Brackets • C) Radio Housing
• D) (2) Black Oval Head Phillips Screws • E) (2) Silver Pan Head Phillips Screws (Small)
• F) (2) Silver Pan Head Phillips Screws (Large) • NOTE: Parts "A" and "C" May Be Snapped
Together In Package
A
D
Small Flat Blade Screwdriver • Panel Removal Tool
• Phillips Screwdriver • 86-3528 Radio Removal Keys
1-800-221-0932
© COPYRIGHT 2008 METRA ELECTRONICS CORPORATION
APPLICATIONS
SATURN
Astra 2008
B
E
TOOLS REQUIRED:
www.metraonline.com
C
F
Advertisement
Related Manuals for Metra Electronics 99-3107S
Summary of Contents for Metra Electronics 99-3107S
- Page 1 • F) (2) Silver Pan Head Phillips Screws (Large) • NOTE: Parts “A” and “C” May Be Snapped Together In Package TOOLS REQUIRED: Small Flat Blade Screwdriver • Panel Removal Tool • Phillips Screwdriver • 86-3528 Radio Removal Keys www.metraonline.com 1-800-221-0932 © COPYRIGHT 2008 METRA ELECTRONICS CORPORATION...
-
Page 2: Dash Disassembly
99-3107 T ABLE OF CONTENTS Dash Disassembly - SATURN Astra 2008 ..........1 Kit and Final Assembly - DIN Radio Provision With Pocket . - Page 3 99-3107 DASH DISASSEMBL Y SA TURN ASTRA 2008 isconnect the negative battery terminal to prevent an accidental short circuit. Using the radio removal keys, pull the factory head unit from the dash and disconnect the wiring. Unplug and remove the radio. (Figure A) Pull down on the "cage"...
- Page 4 99-3107 KIT AND FINAL ASSEMBL Y DIN RADIO PROVISION WITH POCKET Note: Refer also to the instructions included with the aftermarket radio. Locate the factory wiring harness in the dash. Use the supplied wire har- nesses and make the connections as shown.
- Page 5 99-3107 KIT AND FINAL ASSEMBL Y DIN RADIO PROVISION WITH POCKET Note: Refer also to the instructions included with the aftermarket radio. Slide the aftermarket radio into the cage until it snaps into place. (Figure D) Snap the trim plate/pocket onto the radio housing.
- Page 6 99-3107 KIT AND FINAL ASSEMBL Y ISO MOUNT RADIO PROVISION WITH POCKET Note: Refer also to the instructions included with the aftermarket radio. Locate the factory wiring harness in the dash. Use the supplied wire har- nesses and make the connections as shown.
- Page 7 99-3107 KIT AND FINAL ASSEMBL Y ISO MOUNT RADIO PROVISION WITH POCKET Note: Refer also to the instructions included with the aftermarket radio. Slide the the assembly into the sub dash and secure with the supplied (4) Silver Pan Head Phillips screws (Small on top and Large on Bottom).
- Page 8 99-3107 INSTRUCTIONS 1-800-221-0932 www.metraonline.com REV. 10/28/08 © COPYRIGHT 2008 METRA ELECTRONICS CORPORATION INST99-3107...