Table of Contents
Advertisement
3.2 Explanation of components
3.2
Explanation of components
The following is an explanation of the devices needed for operat-
ing the machine.
To carry out suitable operations correctly and safely, it is impor-
tant to understand fully the methods of operating the equipment
and the meanings of the displays.
3.2.1
Machine monitor
E
A: Character display
B: Emergency stop items
C: Caution items
D: Inspection and maintenance items
NOTE
When turning the starting switch to the ON position before start-
ing the engine, the central warning lamp, caution lamps, and
pilot lamps light up for 2 seconds to check the system.
After the alarm buzzer sounds for 2 seconds, it goes off if the
condition is normal.
The shift indicator display shows "88" for 2 seconds.
The indicator gauges and meters are actuated after the above
system check is completed.
The character display shows "KOMATSU WA500" for 3 seconds.
If the lamps do not light up, there is probably a failure or discon-
nection, so contact your KOMATSU distributor for inspection.
3-8
F
C
F
E
E
F
C
A
E
B
D
E: Pilot display
F: Meter display
G: Central warning lamp
Operation
F
G
GK050026
E
C
WA500-6H – VEAM430100
B
D
Hide quick links:
Advertisement
Table of Contents
