Table of Contents
Advertisement
Safety
Precautions before starting operation, inspection and maintenance (421-93-H1840)
1
WARNING
Read the Operator's Manual before startung operation, inspection, maintenance or transportation.
Precautions before leaving the machine (421-93-H1860)
Sign indicates a hazard of unexpected moving of stopped machine.
2
Lower working device to ground, move work equipment lock lever to lock position and take engine key
with you before leaving machine.
Precautions when traveling in reverse (421-93-H1360)
3
Sign indicates to prevere severe injury or death
Honk to alert people nearby. Be sure no one is on or near machine. Use spotter if view is obstructed.
4
Use KOMATSU oil only (421-93-H1390)
Do not enter (421-93-H1320)
5
Sign indicates a crush hazard between the articulating parts of the vehicle.
Keep away from the vehicle when it is move.
Precautions for safety bar (421-93-H1330)
6
Sign indicates a crush hazard between the articulating parts of vehicle.
Lock vehicle with lock bar to avoid movement during maintenance, inspection and transportation.
Precautions when coolant is at high temperature (421-93-H1280)
7
Sign indicates a burn hazard from spurting hot water if radiator is uncapped while hot.
Allow coolant to cool before removing cap.
Precautions when handling battery cable (421-93-H1310)
8
Sign indicates an electric hazard from handling the cable.
Read manual for safe and proper handling.
High pressure warning (421-93-H1300)
9
There is a hazard of explosion injury.
Do not disassembly the accumulator, make holes in it, weld it cut it, hit it, roll it or bring it near flame.
Do not climb on fender (421-93-H1400)
10
Sign indicates a hazard of falling.
Do not stand on this place here.
Do not open when engine is running (09667-A0880)
11
Sign indicates a hazard of rotating parts, such as belt.
Turn off engine before inspection and maintenance.
"Do not come under machine" sign (421-93-H1370)
12
Sign indicates a hazard of being run over by moving vehicle.
Keep a safe distance from vehicle when it is moving.
"Do not go under work equipment" sign (421-93-H1380)
13
Sign indicate a crush hazard from falling off of working device.
Keep away when the working device is raised.
14
Safety measures before starting work (421-93-H1340)
Keep a safe distance from electric power lines (09801-C0481)
15
Sign indicates an electrocution hazard if machine is brought too near electric power lines.
Jump start prohibited.
16
Only start machine from driver's seat. Do not attemp to start the engine by short-circuiting the engine
starting circuit. Such an act may cause a serious bodily injury or fire.
WA500-6H – VEAM430100
2.1 Safety labels
2-5
Hide quick links:
Advertisement
Table of Contents
