Komatsu WA500-6H Operation & Maintenance Manual page 111

Operation
Method of switching travel speed/engine speed display/non
display
Use the following method to display the travel speed or engine
speed or to have no display on the character display.
1. Press the (‘) portion of the character display mode selector
switch to display "ODO" (odometer).
REMARK
If a load meter is installed, when the (‘) portion of the character
display mode selector switch is pressed, the screen displays
"LOAD METER".
If the (>) or (<) portion of the character display item selector
switch is then pressed, the display changes to "ODO" (odome-
ter).
2. Press the (>) or (<) of the character display item selector
switch to display "rpm ON - OFF" or "km/h ON - OFF".
To set to no display for the travel speed or engine speed on
the character display, display "rpm OFF - ON" or "km/h OFF
- ON".
3. Press the (‘) of the character display mode selector switch.
The item that was being displayed changes to non-display,
and the item that was not displayed, is displayed, and the
screen returns to the service meter display.
WA500-6H – VEAM430100
3.2 Explanation of components
O D O
1 2 3 4 . 5 k m
L O A D M E T E R
r p m
O N - O F F
k m / h
O N - O F F
r p m
O F F - O N
k m / h
O F F - O N
< >
„
< >
‘ „
< >
‘ „
< >
‘
„
< >
‘ „
< >
‘
„
3-45