Komatsu WA500-6H Operation & Maintenance Manual page 51

Safety
Parking machine
Park the machine on firm, level ground.
Select a place where there is no hazard of falling rocks or
landslides, or of flooding if the land is low.
Lower the work equipment completely to the ground.
When leaving the machine, set work equipment lock lever
(1) to the LOCK position and parking brake switch (2) to the
ON position, then stop the engine.
Lock all points that can be locked and store the key in a safe
place.
When parking the machine on public roads, ensure that it
does not obstruct traffic. Put up signal lamps and required
warning signs to ensure that passing traffic can clearly see
the machine.
Adhere to all regulations on parking vehicles and securing
building sites
If it is necessary to park the machine on a slope, set blocks
under the wheels to prevent the machine from moving.
WA500-6H – VEAM430100
2.3 Precautions for operation
Free
Lock
2
GK032064
1
GK050006
GK050015
GK032065
2-25