Honda GL1100 interstate Owner's Manual page 60

10. Remove thrce final drive case nuts
( 1 0 ).
11. Move the wheel backward.
12. Separate the final drive case from the
wheel.
13. Remove the wheel.
CAUTION :
* Do not lay the final drire case orer'
The gear oit ma!
lTow out of
the
breather.
N O T E :
* Do not depress the brake pedal while
the wheel is off the motorcycle The
caliper pistons will be forced out of the
cylinders with subsequent loss ol brake
fluid.
If this occurs, servicing of the
brake system will be necessary. See your
authodzed Honda dealer for this service.
Installation:
n"verse ttre removal procedure Apply a
lithium-based
multipurpose
grease with
molybdenum
disulfide
additive
-.to
the
rear hub splines, final drive gear splines and
tlanee pini when rear wheel is removed Be
s ure the s pli nes on the wh eeL h ub fi l i nl o
the final drive case and the splines on the
final drive case fit into the driveshaft end'