Fireback Installation
WARNING:
Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.
1. Remove the grate.
2. Install the firebacks following the directions below.
Remove the clips on both sides (these clips have key-
a
holes, allowing removal without removing the screw)
5/16" Nutdriver
d
Place the floor
firebacks in place.
© Travis Industries
Installation
(for qualified installers only)
Place the rear fireback in place. The side
b
fireback holds the rear fireback in place -
hold the rear fireback while installing the
side fireback.
4120327
41
Place the side firebacks
c
in place. Secure using
the screws and clips
removed in step "a".
100-01290_000