KTM 690 SMC R 2014 Owner's Manual page 143

16 TUNING THE ENGINE
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle components
during the shift procedure.
–
Mount and tighten the screw.
Guideline
401951-10
Screw, shift lever
 of the shift lever and shift shaft.
M6 14 Nm Loctite ® 243™
(10.3 lbf ft)
141