Wheels, Tires; Removing Front Wheel - KTM 690 SMC R 2014 Owner's Manual

13

WHEELS, TIRES

13.1

Removing front wheel

x
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
Main work
–
Remove screw
–
Remove screws
–
Press back the brake linings with a light lateral tilting of the brake caliper on the brake
disc. Pull the brake caliper carefully back from the brake disc and hang it to one side.
Info
Do not pull the handbrake lever when the brake caliper is removed.
101995-10
–
Loosen screw
–
Unscrew screw
spindle out of the axle clamp. Remove screw
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
–
101996-10 –
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.

and pull wheel speed sensor
 and spacers  .
 
and screws .

about 6 turns and press your hand on the screw to push the wheel
Always lay the wheel down in such a way that the brake discs are not dam-
aged.
p. 70)
p. 71)

out of the hole.

.
100