Table of Contents
Advertisement
Installation
It is recommended that you remove any previously installed sound card and drivers
prior to installing this card to avoid any conflicts. If previously installed drivers are not
removed, this sound card may not function properly.
Note: If your computer has on-board sound you will need to disable it on the
motherboard. For more information please see your computer's documentation or
contact your computer's manufacturer.
Hardware Installation
1. Turn your computer off and any peripherals connected to the computer (ie. Printers,
external hard drives, etc.) Unplug the power cable from the rear of the power supply
on the back of the computer.
2. Remove the cover from the computer case.
3. Locate an open PCI slot and remove the metal cover plate on the rear of the
computer case.
4. Insert the card into the open PCI slot and screw the bracket to the rear of the case.
5. Place the cover back onto the computer
6. Insert the power cable into the socket on the power supply.
Driver Installation
(Windows 2000/XP/Server 2003/Vista/7
1. Start up your computer, and place the Driver CD into the CD-ROM drive.
2. Click the Start button on the taskbar and click Run. Type"D:\SOUND\VT1723\setup.
exe". (Assuming you have placed the CD in CD-ROM drive labeled as D).
3. Follow any on-screen instructions to complete the software installation.
4. Restart your system.
5. Once you have rebooted the computer, the sound card will be ready to use.
Instruction Manual
2
Advertisement
Table of Contents
Need help?
Do you have a question about the PCISOUND7 and is the answer not in the manual?
Questions and answers