Highbeam/Lowbeam Select Switch - Jeep 2007 Patriot Owner's Manual

122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
show proper operation of the front and rear turn signal
lights. You can signal a lane change by moving the lever
partially up or down without moving beyond the detent.
If either light remains on and does not flash, or there is a
very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the fuse or indicator bulb is
defective.

Highbeam/Lowbeam Select Switch

High Beam Control
Push the Multi-Function Control Lever away from you to
switch the headlights to HIGH beam. Pull the Lever
toward you, to switch the headlights back to Low beam.