6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS)
6-2. Adjusting the needle up stop position
1
(While pressing the
2
Selecting "UpoS xxx"
(Press once)
3
Needle up stop position setting
4
5
* For details on other adjustment items, refer to the Service Manual.
35
key (1), press the power ON switch.)
(Setting value)
Example:
Becomes higher
Becomes lower
The setting values will be memorized.
Normal sewing machine operation will then be possible.
T-8421C, 8422C, 8452C, 8722C, 8752C
"MorG xxx" will appear in orange in the main display (2).
"xxx" is the setting value for the needle up stop position, and
"0" is the default setting.
•
If you press the
key, the setting value will increase
and the needle up stop position will become lower.
•
If you press the
key, the setting value will decrease
and the needle up stop position will become higher.
•
The setting range is from –5 to 10.
*
A setting value of "10" corresponds to an angle of rotation
of approximately 10° for the upper shaft.
4189M 2138M
4190M
2188B 2138M 2139M
4192M
4193M