Brother T-8421C Instruction Manual page 23

Operator
Green and yellow wire
(ground wire)
T-8421C, 8422C, 8452C, 8722C, 8752C
<200V system>
(1) Power switch
(2) Screws [2 pcs]
4145M
(3) 3-pin power supply connector
2177B
(4) Power cord
(5) Staples [5 pcs.]
1. Attach an appropriate plug to the
power cord (4). (The green and
yellow wire is the ground wire.)
2. Insert the
properly-grounded electrical outlet.
NOTE:
Take care when tapping in the
staples (5) to make sure that they do
not pierce the cords.
Do not use
otherwise
problems may result.
2178B
3. INSTALLATION
power plug into a
extension cords,
machine operation
14