Maintenance - SeaDoo 2002 GTX 4-TEC Operator's Manual

Maintenance

Only perform servicing procedures
which are detailed in this guide. Fur-
ther assistance or information can
be obtained from your authorized
Sea-Doo dealer. In many instances
proper tools and training is required
for certain servicing or repair proce-
dures.
Maintain the watercraft and equip-
ment in top condition at all times. Ad-
here to the prescribed maintenance
schedules. An annual inspection of the
watercraft is always a good recom-
mendation that should be followed.
Always use spark plug cable ground-
ing device when removing spark
plugs (if so equipped).
The bilge should be kept clean of oil,
water or other foreign materials.
Do not attempt to lift the watercraft
without special equipment and train-
ing.
The engine and the corresponding
components identified in this guide
should not be utilized on product(s)
other than for those they were de-
signed. Maintenance procedures and
specified tightening torque should be
strictly adhered to. Never attempt re-
pairs unless the appropriate tools are
available. These watercrafts are de-
signed with parts dimensioned in
both the metric and the imperial sys-
tems. When replacing fasteners,
make sure to use only those recom-
mended by Bombardier. If required,
contact your authorized Sea-Doo
dealer for further servicing informa-
tion.
9