Foreword - SeaDoo 2002 GTX 4-TEC Operator's Manual

FOREWORD

The Operator's Guide and Safety Hand-
book have been prepared to acquaint
the owner/operator or passenger with
this personal watercraft and its various
controls, maintenance and safe riding
instructions. Each is indispensable for
the proper use of the product, and
should be kept in a waterproof bag with
the watercraft at all times.
Make sure you read and understand the
content of the Operator's Guide and
Safety Handbook.
For any questions pertaining to the
warranty and its application, consult
the WARRANTY section in this guide,
and/or an authorized Sea-Doo dealer.
This guide uses the following safety
alert symbol in conjunction with signal
words to indicate a potential personal
injury hazard.
WARNING
Indicates a potentially hazardous sit-
uation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous
situation which, if not avoided,
may result in minor or moderate in-
jury. When used without the safety
alert symbol
exists for property damage only.
NOTE: Indicates supplementary infor-
mation needed to fully complete an in-
struction.
, potential hazard
Although the mere reading of such in-
formation does not eliminate the haz-
ard, the understanding and application
of the information will promote the cor-
rect use of the watercraft.
The information and components/
system descriptions contained in this
guide are correct at the time of writing.
Bombardier Inc. however, maintains a
policy of continuous improvement of
its products without imposing upon it-
self any obligation to install them on
products previously manufactured.
Because of its ongoing commitment
to product quality and innovation,
Bombardier reserves the right at any
time to discontinue or change specifica-
tions, designs, features, models or
equipment without incurring obligation.
The illustrations in this document show
the typical construction of the different
assemblies and may not represent the
full detail or exact shape of the parts.
However, they represent parts that
have the same or similar function.
It is understood that this guide may be
translated into another language. In
the event of any discrepancy, the En-
glish version shall prevail.
Specifications are given in the SI met-
ric system with the SAE U.S. equiva-
lent in parenthesis. Where precise accu-
racy is not required, some conversions
are rounded off for easier use.
A Shop Manual can be obtained for
complete service, maintenance and
more repair information.
5