Documents That Can Be Scanned Using The Carrier Sheet - Fujitsu ScanSnap iX100 Basic Operation Manual

Documents That Can Be Scanned Using the Carrier Sheet

The optional Carrier Sheet is a sheet designed to transport documents through the ScanSnap.
You can scan documents that are larger than A4/Letter size, photographs, and clippings.
Conditions for documents that can be scanned using the Carrier Sheet are as follows:
AUTION
l Do not use a damaged Carrier Sheet. Otherwise, it may damage or cause
l Be careful not to cut your finger on the edge of the Carrier Sheet.
Eject method With the output guide closed
Document type Documents that cannot be loaded directly into the ScanSnap
Paper weight
Up to 52.3 to 209.3 g/m
When scanning documents folded in half:
Up to 104.7 g/m
Paper size Carrier Sheet size (216 × 297 mm)
A3 (297 × 420 mm) (*1)
A4 (210 × 297 mm)
A5 (148 × 210 mm)
A6 (105 × 148 mm)
B4 (257 × 364 mm) (*1)
B5 (182 × 257 mm)
B6 (128 × 182 mm)
Postcard (100 × 148 mm)
Business card (90 × 55 mm, 55 × 90 mm)
Letter (8.5 × 11 in. (216 × 279.4 mm))
11 × 17 in. (279.4 × 431.8 mm) (*1)
Custom size
Width: 25.4 to 216 mm (1 to 8.5 in.)
Length: 25.4 to 297 mm (1 to 11.69 in.)
*1: Fold in half to scan.
Documents for Which the Carrier Sheet is Recommended for
Scanning
It is recommended that you use the Carrier Sheet to scan the following documents.
l Documents written in pencil
Because there may be black traces left on the documents, it is recommended that you use the
Carrier Sheet to scan such documents.
When you scan such documents directly without using a Carrier Sheet, dirt will accumulate on
the rollers, which may cause feeding errors. Clean the rollers occasionally.
For details about how to perform cleaning, refer to
112).
l Carbonless paper
the ScanSnap to malfunction.
2
(14 to 56 lb)
2
(28 lb)
"Cleaning the Inside of the ScanSnap" (page
69
Documents to Scan