Fujitsu ScanSnap iX100 Basic Operation Manual page 62

a The [ScanSnap Manager - Connect by Wi-Fi] window appears.
4.
From the list of the ScanSnap units to be connected, select the ScanSnap
that you want to connect, and click the [Connect] button.
ATTENTION
l If the [ScanSnap Manager - Enter Destination Password] window appears, enter the
password to connect.
The default password is the last four digits of the ScanSnap serial number.
The password can be changed with the ScanSnap Wireless Setup Tool. For details, refer to
the ScanSnap Wireless Setup Tool Help.
l If the intended ScanSnap for connection does not appear in the list of the ScanSnap units to
be connected, refer to the ScanSnap Manager Help.
a The ScanSnap is connected to the computer via a wireless access point and the ScanSnap
Manager icon changes to
HINT
When the ScanSnap and a computer are connected via wireless LAN, a pop-up balloon notifies
you of the communication status.
.
62
Connecting the ScanSnap via Wireless LAN