4.
Press and hold (3 seconds or longer) the WPS button on the back of the
ScanSnap within 2 minutes after pressing the WPS button of the wireless
access point.
a The ScanSnap is connected to the wireless access point and the Wi-Fi indicator lights up in
blue.
If connection cannot be established, the Wi-Fi indicator blinks or lights up in orange.
ATTENTION
If you cannot connect the ScanSnap to a wireless access point, refer to "Troubleshooting" in the
ScanSnap Manager Help.
HINT
For details about the Wi-Fi indicator status, refer to
WPS Button
65
Connecting the ScanSnap via Wireless LAN
"Parts and Functions" (page
36).