R Esetting To F Actory D Efaults - Dish Network HDTV Satellite Receiver User Manual

4
If Volume Leveling is desired, select Enable to turn on Volume Leveling. Volume leveling
keeps the volume levels consistent between programs and commercials, preventing
drastic volume changes while watching television.
Note: When volume leveling is enabled, only the digitial PCM and RCA analog line
outputs are affected.
5
Select Done.
R F
ESETTING TO
You can reset the receiver to discard any changes you have made to the receiver, except
for remote control address setting and locks. Resetting the receiver to factory default
settings also discards all Favorite Lists except the My Channels, My HD Channels, and All
Channels lists.
If you have set any locks on the receiver, and the receiver is locked, these locks will be
kept. If the receiver is unlocked, any such locks will be lost. You cannot reset the receiver
to default settings to discard a password you have forgotten. No one but a Customer
Service Representative can reset the receiver to bypass a receiver lock.
System Setup
Factory Defaults
Press Menu, then System Setup
and Factory Defaults
1
Press MENU, select System Setup, and then Factory Defaults. The receiver displays a
Warning message to confirm that you want to reset the receiver's preferences.
2
Select Yes.
D
ACTORY EFAULTS
1
6
Select Yes.
5
STB returns to
Factory Defaults.
Connections and Setup
Resetting to Factory Defaults
2
75