Table of Contents
Advertisement
RELD D D D D Button
Press (REL) button to enter the Relative mode, the "RELD" annunciator turn
on, zero the display, and store the displayed reading as a reference value.
Press and hold down the (REL) button for 2 seconds to exit the relative mode.
MIN / MAX button
Press (MIN / MAX) button to enter the MIN MAX Recording mode. The
minimum, maximum values are then reset to the present input, the readings
are stored in memory, and the "HOLD" annunciator turns on. Push the button
to cycle through the minimum (MIN), maximum (MAX), and present readings.
The MIN or MAX annunciator turns on to indicate what value is being
displayed.
In the MIN MAX Recording mode, press (HOLD) button to stop the recording
of readings, press again to restart recording. If recording is stopped, the
minimum, maximum, or present values and analog diaplay are frozen. In the
MIN MAX Recording mode, when a new minimum value is exceed the actual
minimum readings or a new maximum value is overload, the minimum or
maximum value will held on the display, but the analog display continues to be
active.
7
Advertisement
Table of Contents
