Remote Control - Bosch DIVAR AN 5000 Operation Manual

DIVAR AN 3000 / DIVAR AN 5000
Play previous
Reverse/Pause
Play Next
Play/Pause
The DIVAR 5000 also has the following buttons
Export
Sequence
Numeric keypad
The front panels also have the following status lights and a USB connector:
Status lights
Channel record
Hard disk
Network
USB port
7.1.3

Remote control

All functions controlled by the front panel and USB mouse can, alternatively, be accessed
using the supplied remote control.
The IR remote control allows control of up to 999 units without interfering with one another.
An ID number must be chosen on the remote control and in the system (see menu Setting >
General for setting a system ID for each unit).
To set the ID on the remote control:
1.
Bosch Security Systems
Symbol
1-16
Press the Add button on the remote control.
In playback mode, playback the previous video
In text mode or when choosing a camera channel, input
number 7 (only on DIVAR AN 3000 )
In normal playback or pause mode, click to reverse playback
In reverse playback, click to pause playback
In text mode or when choosing a camera channel, input
number 1 (only on DIVAR AN 3000 )
In playback mode, playback the next video
In menu setup, scroll down the dropdown list
In text mode or when choosing a camera channel, input
number 8 (only on DIVAR AN 3000 )
In normal playback, click to pause playback
In pause mode, click to resume playback
In text mode or when choosing a camera channel, input
number 2 (only on DIVAR AN 3000 )
Export the currently selected files to an external device
Activate the camera views in a pre-set sequence
Switch camera channels
In text mode, enter characters in a field (use the Shift
button to change the input mode)
Function
A channel number is lit if the channel is recording.
Is lit if an installed hard disk has an error or is full.
Is lit if a user is connected to the DVR online.
Connect USB storage device or USB mouse to this port.
Operations Manual
Operating instructions | en
2014.10 | 2.0 | AM18-Q0669
87