Note:
1. You should connect the power supply to a surge protector or power bar. All Ethernet cables used must be mini-
mum category 5/5e straight-through cables, such as the cable provided with your phone.
2. Category 6 straight through cables are recommended for Gigabit Ethernet performance.
Connecting a Handset or Headset
Handset
Turn the phone over and locate the handset jack marked j. Insert one end of handset cord into the jack until it clicks
into place. Then route the handset cord through the groove as shown in the illustration below. Attach the handset to the
other end of the handset cord.
Headset (Optional)
Turn the phone over and locate the headset jack marked
Then route the headset cord through the groove as shown in the above illustration.
41-001370-00 Rev 01 – 07.2011
Ethernet
Cables
Network Jack
Power Outlet
PoE
Power injector
(if Inline power is
not provided)
To Network
To Phone
Jack
To Handset
f
To PoE
To Headset
. Insert the headset cord into the jack until it clicks into place.
Installation and Setup
9