Table of Contents
Advertisement
To select the color correction in a supported driver:
Operating System
Windows 98 SE,
Windows 2000,
Windows XP, or
Windows Server 2003
Mac OS 9.x
Mac OS X, version
10.2 and higher
More Options for Color Corrections
If you need to make additional color adjustments to the color correction you have selected for
your job, you can adjust the following sliders throughout the More Options selection in a
supported driver:
■
Lightness: Move the slider to the right to lighten or to the left to darken the colors in your
print job. (White remains white and black remains black.)
■
Contrast: Move the slider to the right to increase or to the left to decrease the contrast.
With increased contrast, saturated colors become more saturated, darker colors become
more black, and lighter colors become more white.
■
Saturation: Move the slider to the right to increase or to the left to decrease the color
intensity without changing the darkness.
■
Cyan/Red: Move the slider to change the gamma function between cyan and red. Moving
the slider to the right increases the cyan and decreases the red (its compliment) and vice
versa.
■
Magenta/Green: Move the slider to change the gamma function between magenta and
green. Moving the slider to the right increases the magenta and decreases the green (its
compliment) and vice versa.
■
Yellow/Blue: Move the slider to change the gamma function between yellow and blue.
Moving the slider to the right increases the yellow and decreases the blue (its compliment)
and vice versa.
Note:
Select the Apply to CMYK check box in the driver to apply the color adjustments
when Press Match color corrections are used.
The sample images change as you move the sliders. To track the adjustments, select the Print
Settings on Page box to print the file name, print-quality mode, and color settings for the job
on the edge of the page.
Phaser® 8510/8560MFP Multifunction Product
Steps
1.
Select the TekColor tab.
2.
Select the desired color correction. Some of the color corrections are
grouped under Office Color or Press Match.
1.
In the Print dialog box, select General.
2.
Select TekColor from the drop-down list.
3.
Select the desired color correction.
1.
In the Print dialog box, select Image Quality from the drop-down list.
2.
Select the desired color correction from the Color Correction
drop-down list.
1-9
Using Color Corrections
Advertisement
Table of Contents
Troubleshooting
