Xerox Phaser8510 Advanced Features Manual page 56

Creating an AppleTalk System with Mac OS X, Version 10.2 and Higher
To create an AppleTalk printer:
1. Verify that AppleTalk is enabled in System Preferences.
2.
Open the Print Center utility. In Mac OS X, version 10.3 or higher, open the Printer
Setup Utility. The utility is located in a directory called Utilities in the Applications
directory.
3. Select Add Printer, and then select AppleTalk from the pull-down list.
4. Select the appropriate zone.
5.
Select your system from the list provided.
6. Select the appropriate PPD from the list in the Printer Model drop-down list. If your
system PPD is not listed, install it from the Software and Documentation CD-ROM.
7. Click Add to complete the configuration.
See also:
Knowledge Base at www.xerox.com/office/8510_8560support
Creating a Bonjour System with Mac OS X, Version 10.2 and Higher (Recommended)
To create a Bonjour printer:
1.
Open the Print Center utility. In Mac OS X, version 10.3 or higher, open the Printer
Setup utility. The utility is located in Utilities in the Applications directory.
2.
Select one of the following options:
■ Version 10.2: Click Add.
■ Version 10.3: From the top pull-down menu, select Bonjour.
■ Version 10.4 and higher: Select your system from the list and ensure Bonjour and
not Apple Talk is in the Connection column. Your PPD is automatically selected.
A list appears displaying name of your system, followed by a series of numbers. For
example, Your System's Name xx:xx:xx. Each numbered segment represents the last
section of your system's hardware address. Your PPD is automatically selected.
3.
Click Add to complete the installation.
Phaser® 8510/8560MFP Multifunction Product
3-19
Macintosh