Windows 2000, Windows Xp, And Windows Server 2003; Preliminary Steps; Quick Cd-Rom Install Steps - Xerox Phaser8510 Advanced Features Manual

Windows 2000, Windows XP, and Windows Server
2003
This section includes:
■

Preliminary Steps

on page 3-4
■

Quick CD-ROM Install Steps

■ Other Methods of Installation
■ Windows 2000, Windows XP, and Windows Server 2003 Troubleshooting
Preliminary Steps
These preliminary steps must be performed for all systems:
1.
Verify that the system is plugged in, turned On, and connected to an active network.
2.
Verify that the system is receiving network information by monitoring the LEDs on the
back of the system or on the CentreDirect External Print Server. When the system is
connected to a functioning network and receiving traffic, its link LED is green, and its
amber traffic LED is flashing rapidly.
3.
Proceed to Quick CD-ROM Install Steps or Other Methods of Installation for the
installation method desired.
4.
Print the Configuration page and keep it for reference.
Quick CD-ROM Install Steps
To install the printer driver:
1. Insert the Software and Documentation CD-ROM into the computer's CD-ROM drive. If
the installer does not launch, do the following:
a.
Click Start, and then click Run.
b. In the Run window, type: <CD drive>:\INSTALL.EXE.
2. Select your desired language from the list.
3. Click Install Drivers.
4. Select one or more of the following options:
■ Install Print and Scan Driver: Automatically installs both the print and scan drivers.
Install Print Driver: Installs the print driver.
■
■ Install Scan Driver: Installs the scan driver.
Phaser® 8510/8560MFP Multifunction Product

Windows 2000, Windows XP, and Windows Server 2003

on page 3-4
on page 3-5
3-4
on page 3-9