Table of Contents
Advertisement
Using the Control Panel
To select a Tray 1 mode setting on the control panel:
1.
Press the System button.
2.
Select
General Setup
3.
Select
Paper Handling Setup
4.
Select
, and then press the OK button.
Tray 1 Mode
5.
Select the appropriate setting, and then press the OK button.
Using CentreWare IS
To select a Tray 1 mode setting using CentreWare IS:
1.
Launch your web browser.
2.
Enter the system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left sidebar, and then select System Defaults.
5.
Select the appropriate setting in the Tray 1 Mode drop-down list.
6.
Click the Save Changes button at the bottom of the page.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
4-10
System Settings
Advertisement
Table of Contents
Troubleshooting
