DSC PowerSeries Installation Manual page 22

Self Contained Wireless Alarm System v1.0
[014] Second System Options
Opt Def. ON
1
Arm/Disarm Bell Squawk Enabled
2
Future Use
3 RF Jam Log After 5 Minutes
4 Aux Boost Enabled
5
Future Use
6
Audible Exit With Urgency
7
Future Use
8
Fire Bell is Continuous
[015] Third System Options
Opt Def. ON
1
[F] Key Enabled
2
[P] Key Audible (Bell/Beeps)
3
Quick Exit Enabled
4
Quick Arming Enabled ([ ][0] and Function Keys)
5
Code Required for Bypassing
6
Master Code not Changeable
7
TLM Enabled
8
System Tamper Enabled
[016] Fourth System Options
Opt Def. ON
1
Cross Zoning Enabled
2
Exit Delay Restart Enabled (required for CP-01)
3
Blank Keypad When Not Used
4
Code Required to Remove Keypad Blanking
5
Keypad Backlighting Enabled
6
ID WKEY Not required for Disarming
7
Bypass Status Displayed While Armed
8
Daylight Saving Time Enabled
[023] Tenth System Options
Opt Def. ON
1 [F] Key Beeps Only
2 Future Use
3 Test Transmission while Armed Only
4
Test Transmission Counter in Hours
5 Switching from Away to Stay Disabled
*6 New Alarms will not disconnect 2-way Audio
7 Trouble beeps are Silent
8 Keyswitch Arms in Away Mode
* Applies to SCW9047 version only. This option must be OFF for UL Listed Installations
18
WWW.DIYALARMFORUM.COM
OFF
Arm/Disarm Bell Squawk Disabled
RF Jam Logs After 20 seconds
Aux Boost Disabled
Silent Exit Delay
Fire Bell Follows Bell Cut-off
OFF
[F] Key Disabled
[P] Key Silent
Quick Exit Disabled
Quick Arming Disabled (Function Key Requires Code)
No Code Required
Master Code Changeable
TLM Disabled
System Tamper Disabled
OFF
Police Code enabled
Exit Delay Restart Disabled
Keypad Always Active
No Code Required
Keypad Backlighting Disabled
ID WKEY Required for Disarming
Bypass Status Not Displayed While Armed
Daylight Saving Time Disabled
OFF
[F] Key Beeps and Sounds Bell
Test Transmission while Armed/Disarmed
Test Transmission Counter in Days
Away to Stay Toggle Option Permitted
New Alarms disconnect 2-way Audio
Trouble Beeps Sound Every 10 seconds
Keyswitch Arms in Stay or Away Mode